Parcourir par tags

Tous les tags » Vêtements de protection » Normes et législation (RSS)
ASTM F1506 - Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
This performance specification covers the design characteristics and associated test methods that relate specifically to the flame resistance of textile materials used in the fabrication of basic protection level occupational apparel worn by electrical workers who are exposed to momentary electric arc and related thermal hazards such as exposure to open flame and radiant heat. When evaluated in accordance with the test procedures enlisted herein, knit fabrics and woven fabrics of different fabric weights shall conform to individually specified values of the following properties: colorfastness such...
ASTM D8248 - Standard Terminology for Smart Textiles
This terminology standard covers terms related to smart textiles, technical textiles, electronic textiles, and wearable electronics including fibers, yarns, and end products. Source:
NF EN 943-1+A1 - Exigences de performance des combinaisons de protection chimique étanches aux gaz
Domaine d'application: La présente Norme européenne définit les exigences minimales, les méthodes d'essai, le marquage ainsi que les informations fournies par le fabricant concernant les combinaisons de protection chimique ventilées et non ventilées étanches aux gaz. Elle décrit les combinaisons individuelles protégeant tout le corps destinées à être portées pour se prémunir des produits chimiques solides, liquides et gazeux, y compris les aérosols liquides et les particules solides....
NF EN 14325 - Habillement de protection contre les produits chimiques
La présente Norme européenne spécifie la classification de la performance et les méthodes d'essai pour les matériaux utilisés dans les vêtements de protection chimique, y compris les gants et les chaussures. Lorsque les gants et les bottes font partie intégrante du vêtement, il convient que les exigences en matière de barrière de protection chimique auxquelles ils sont soumis soient les mêmes pour que pour les étoffes. Il s'agit d'une norme de référence à laquelle les normes...
NFPA 1999 - Standard on Protective Clothing and Ensembles for Emergency Medical Operations
This standard specifies requirements for EMS protective clothing to protect personnel performing patient care during emergency medical operations from contact with blood and body fluid-borne pathogens. It also includes additional requirements that provide limited protection from specified CBRN terrorism agents. Source:
ASTM F903 - 18 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Significance and Use: This test method is normally used to evaluate the barrier effectiveness against penetration of liquids through materials, seams, closures, or other planar assemblies used in protective clothing and specimens from finished items of protective clothing. Finished items of protective clothing include gloves, arm protectors, aprons, coveralls, suits, hoods, boots, and similar items. Scope: This test method is used to test specimens of protective clothing materials, assemblies such as seams and closures, or interfaces used in the construction of protective clothing. The resistance...
ASTM F2669 - 12(2018) - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
Scope: This specification establishes minimum performance, classification, and labeling requirements for protective clothing worn by operators applying pesticide products, primarily field strength, in liquid form. Protective clothing items covered by this specification include, but are not necessarily limited to, liquid-tight or spray-tight garments, coveralls, jackets, shirts, and pants. This specification addresses protection provided by protective accessories, with the exception of those used for the protection of the head, hands, and feet. This specification does not address protection against...
ASTM F2130 - 11(2018) - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
Significance and Use: This test method can be used for laboratory screening of protective clothing material used to manufacture garments and accessories worn by pesticide workers. This test method can be used for the development and evaluation of new protective clothing materials. This test method can be used for the evaluation of protective clothing materials against new pesticide formulations. Scope: This test method measures repellency, retention, and penetration of a known volume of liquid pesticide when applied to protective clothing material. No external hydrostatic or mechanical pressure...
ANSI/ISEA 203-2018 – American National Standard for Secondary Single-Use Flame Resistant Protective Clothing for Use Over Primary Flame Resistant Protective Clothing
ISEA has developed this new standard to establish minimum performance and labeling requirements for secondary single-use flame resistant protective clothing. These are commonly used in utility work and refinery maintenance and in steel processing facilities where metal is being cut or welded. Apparel covered by ANSI/ISEA 203-2018 is designed for use in industrial settings where flame hazards may exist and such clothing will not negatively impact the thermal performance afforded by the primary flame resistant protective clothing that is worn underneath. Compliant items are independently evaluated...
ASTM F1301-18 - Standard Practice for Labeling Chemical Protective Clothing
This practice contains the recommendations for minimal informational requirements for the identification of chemical protective clothing items. It is intended to provide the user with some of the basic information necessary for the proper selection and use of the chemical protective clothing. For some items of chemical protective clothing, such as disposable chemical protective gloves, it is recognized that it is not practical that the labeling information be provided directly on the product. Therefore, it is permissible that this information be provided on the direct packaging that contains the...
Z96-15 - High-visibility safety apparel
This is the third edition of CSA Z96, High-visibility safety apparel. It supersedes the previous editions published in 2009 and 2002. This edition incorporates advice on selection, use, and care of high-visibility safety material taken from the CSA Z96.1 Guideline (see Annex A). It is designed to be in technical harmony with ANSI/ISEA 107 and ISO 20471. The focus of this Standard is on the performance of retroreflective and background materials incorporated into garments intended to provide the wearer with increased conspicuity under both wellilluminated and low-light or dark work environmental...

Abonnement courriel

Messages récents


Mots-Clés (Tags)