Parcourir par tags

Tous les tags » Propriétés physiques des matériaux (RSS)
ASTM F2100 - Standard Specification for Performance of Materials Used in Medical Face Masks
This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing for bacterial filtration efficiency, differential pressure, sub-micron particulate filtration efficiency, resistance to penetration by synthetic blood, and flammability. This specification does not address all aspects of medical face mask design and performance, the effectiveness of medical face mask designs as related...
ASTM F2053 - 00(2017) - Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
This guide is intended to encourage thorough and consistent documentation of airborne particle penetration testing and its results. Uniform information and performance data increase the likelihood of selecting proper particle protective clothing by direct comparison of one material with another. A standard format for test information and data also encourages computer storage of test results for easy retrieval, comparison, and correlations. This guide provides a format for documenting information and performance data for an airborne particle penetration test. Documented data and information are...
ASTM F1407 - 12(2017) - Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation
Permeation Cup Method This test method establishes a standard procedure for rapidly (in 1 h or less) determining the chemical resistance of specimens of protective clothing materials. This test method can be used to rank materials as to their suitability for use with liquids of known or unknown composition. The breakthrough detection time, permeation rate, or cumulative permeation can be used to identify protective clothing materials that are more likely to limit potential exposures to chemicals. Longer breakthrough detection times and lower cumulative amounts permeated and permeation rates are...
ASTM F1001 - 12(2017) - Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
This guide establishes a recommended list of challenge chemicals to encourage those who evaluate chemical protective clothing to test a minimum number of chemicals in common. This list will simplify the comparison of data from different sources. This guide may also serve material developers or evaluators in screening candidate protective clothing materials. Source:
ASTM F1868-17 - Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
The thermal resistance and evaporative resistance provided by fabrics, films, coatings, foams, and leathers, including multi-layer assemblies, is of considerable importance in determining their suitability for use in fabricating protective clothing systems. The thermal interchange between people and their environment is, however, an extremely complicated subject that involves many factors in addition to the steady-state resistance values of fabrics, films, coatings, foams, and leathers, including multi-layer assemblies. Therefore, thermal resistance values and evaporative resistance values measured...
Résistance des matériaux de protection aux agresseurs mécaniques multiples
Coupure et perforation simultanées Les lacérations de type perforation et coupure représentent une part importante des blessures aux mains dans plusieurs milieux de travail. Les agresseurs mécaniques comme la pointe d'un couteau, des échardes de métal, des pièces mal ébavurées ou des éclats de verre peuvent être très diversifiés et constituer des risques multiples. Le port de gants de protection contribue à réduire ces risques. Cependant, les gants n'offrent pas toujours une résistance...

Abonnement courriel

Messages récents


Mots-Clés (Tags)