Parcourir par tags

Tous les tags » Normes et législation (RSS)
NF EN 943-1+A1 - Exigences de performance des combinaisons de protection chimique étanches aux gaz
Domaine d'application: La présente Norme européenne définit les exigences minimales, les méthodes d'essai, le marquage ainsi que les informations fournies par le fabricant concernant les combinaisons de protection chimique ventilées et non ventilées étanches aux gaz. Elle décrit les combinaisons individuelles protégeant tout le corps destinées à être portées pour se prémunir des produits chimiques solides, liquides et gazeux, y compris les aérosols liquides et les particules solides....
NF EN 14458 - Visières haute performance uniquement destinées à une utilisation avec des casques de protection
La présente Norme européenne spécifie les exigences minimales s'appliquant aux visières spécifiquement conçues pour une utilisation exclusive avec des casques de protection, tels que des casques de sapeurs-pompiers, conformes à l'EN 443, l'EN 16471 et l'EN 16473 et des casques de protection à haute performance pour l'industrie conformes à l'EN 14052. Il peut s'agir de visières fixées de manière permanente au casque, ou de visières amovibles. Source: https://www.boutique.afnor.org...
NF EN 14594 - Appareils de protection respiratoire
Le présent document spécifie les caractéristiques minimales exigées des appareils de protection respiratoire (APR) isolants à adduction d'air comprimé à débit continu utilisés avec des masques complets, des demi-masques, des cagoules, des casques ou des combinaisons, ainsi que des appareils utilisés dans les opérations de projection d'abrasifs en tant qu'appareils de protection respiratoire. Source: https://www.boutique.afnor.org/norme/nf-en-14594/appareils-de-protection-respiratoire-appareils-de-protection...
NF EN 14325 - Habillement de protection contre les produits chimiques
La présente Norme européenne spécifie la classification de la performance et les méthodes d'essai pour les matériaux utilisés dans les vêtements de protection chimique, y compris les gants et les chaussures. Lorsque les gants et les bottes font partie intégrante du vêtement, il convient que les exigences en matière de barrière de protection chimique auxquelles ils sont soumis soient les mêmes pour que pour les étoffes. Il s'agit d'une norme de référence à laquelle les normes...
NFPA 1999 - Standard on Protective Clothing and Ensembles for Emergency Medical Operations
This standard specifies requirements for EMS protective clothing to protect personnel performing patient care during emergency medical operations from contact with blood and body fluid-borne pathogens. It also includes additional requirements that provide limited protection from specified CBRN terrorism agents. Source: https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=1999
ASTM F903 - 18 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Significance and Use: This test method is normally used to evaluate the barrier effectiveness against penetration of liquids through materials, seams, closures, or other planar assemblies used in protective clothing and specimens from finished items of protective clothing. Finished items of protective clothing include gloves, arm protectors, aprons, coveralls, suits, hoods, boots, and similar items. Scope: This test method is used to test specimens of protective clothing materials, assemblies such as seams and closures, or interfaces used in the construction of protective clothing. The resistance...
ASTM F2669 - 12(2018) - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
Scope: This specification establishes minimum performance, classification, and labeling requirements for protective clothing worn by operators applying pesticide products, primarily field strength, in liquid form. Protective clothing items covered by this specification include, but are not necessarily limited to, liquid-tight or spray-tight garments, coveralls, jackets, shirts, and pants. This specification addresses protection provided by protective accessories, with the exception of those used for the protection of the head, hands, and feet. This specification does not address protection against...
ASTM F2130 - 11(2018) - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
Significance and Use: This test method can be used for laboratory screening of protective clothing material used to manufacture garments and accessories worn by pesticide workers. This test method can be used for the development and evaluation of new protective clothing materials. This test method can be used for the evaluation of protective clothing materials against new pesticide formulations. Scope: This test method measures repellency, retention, and penetration of a known volume of liquid pesticide when applied to protective clothing material. No external hydrostatic or mechanical pressure...
ASTM E3108-18 - Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
Scope: This practice establishes the conformity assessment requirements for protective gloves worn by law enforcement and corrections officers. It was developed based on end user input regarding hazards of concern and operational requirements of officers.2 This practice provides two options for conformity assessment: (1) supplier's declaration of conformity (SDOC) and (2) certification. This practice is intended to be used by purchasers and suppliers in the procurement of gloves that meet Specification E3109, and the purchaser is responsible for selecting either SDOC or certification. Source...
ASTM E3109-18 - Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
Scope: This specification addresses protective gloves worn by law enforcement and corrections officers. This specification and related standards were developed by subject matter experts, including experienced end users, using data from a survey of more than 800 U.S. law enforcement and corrections officers. This specification addresses performance requirements, performance ratings, and test methods for whole gloves and for glove components (for example, materials, layers). Source: https://www.astm.org/Standards/E3109.htm
ANSI/ISEA 203-2018 – American National Standard for Secondary Single-Use Flame Resistant Protective Clothing for Use Over Primary Flame Resistant Protective Clothing
ISEA has developed this new standard to establish minimum performance and labeling requirements for secondary single-use flame resistant protective clothing. These are commonly used in utility work and refinery maintenance and in steel processing facilities where metal is being cut or welded. Apparel covered by ANSI/ISEA 203-2018 is designed for use in industrial settings where flame hazards may exist and such clothing will not negatively impact the thermal performance afforded by the primary flame resistant protective clothing that is worn underneath. Compliant items are independently evaluated...
ASTM F2100 - 11(2018) - Standard Specification for Performance of Materials Used in Medical Face Masks
This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing for bacterial filtration efficiency, differential pressure, sub-micron particulate filtration efficiency, resistance to penetration by synthetic blood, and flammability. This specification does not address all aspects of medical face mask design and performance, the effectiveness of medical face mask designs as related...
ASTM F1301-18 - Standard Practice for Labeling Chemical Protective Clothing
This practice contains the recommendations for minimal informational requirements for the identification of chemical protective clothing items. It is intended to provide the user with some of the basic information necessary for the proper selection and use of the chemical protective clothing. For some items of chemical protective clothing, such as disposable chemical protective gloves, it is recognized that it is not practical that the labeling information be provided directly on the product. Therefore, it is permissible that this information be provided on the direct packaging that contains the...
Z259.11-F17 - Absorbeurs d'énergie individuels et cordons d'assujettissement
Ce document constitue la troisième édition de CSA Z259.11, Absorbeurs d'énergie individuels et cordons d'assujettissement. Il remplace les éditions antérieures, publiées en 2005 sous le titre Absorbeurs d'énergie et cordons d'assujettissement et en 1992 sous le titre Absorbeurs d'énergie pour dispositifs antichutes. Le but de cette norme est de prescrire des exigences visant la performance, la conception, la mise à l'essai, l'étiquetage et le marquage des absorbeurs d'énergie individuels...
Safe use and best practices for mast climbing work platforms (MCWPs) / Training for mast climbing work platforms
The purpose of this Standard is to specify minimum requirements for the establishment of criteria for safe use and best practices in order to achieve the following objectives: a) prevention of personal injuries and accidents; b) uniformity in ratings; and c) understanding by manufacturers, dealers, installers, maintenance personnel, operators, owners, and users of their respective responsibilities. Source: http://shop.csa.ca/en/canada/elevated-work-platforms/b35410-17b35411-17/invt/27041922017
Les appareils de protection respiratoire
Choix et utilisation Ce guide s'adresse à toute personne qui, en situation de travail, doit procéder au choix d'un appareil de protection respiratoire pour une situation de travail où il existe un risque d'altération de la santé par inhalation d'un air pollué par des gaz, vapeurs, poussières, aérosols ou d'un air appauvri en oxygène . Il a été élaboré avec le concours des constructeurs d'appareils et du Syndicat national des matériels et articles de protection (SYNAMAP). Après...
ASTM F2053 - 00(2017) - Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
This guide is intended to encourage thorough and consistent documentation of airborne particle penetration testing and its results. Uniform information and performance data increase the likelihood of selecting proper particle protective clothing by direct comparison of one material with another. A standard format for test information and data also encourages computer storage of test results for easy retrieval, comparison, and correlations. This guide provides a format for documenting information and performance data for an airborne particle penetration test. Documented data and information are...
Market surveillance of FFP3 disposable respirators
Filtering Facepieces (FFPs) are disposable Respiratory Protective Equipment (RPE) for protection against dusts, particles and aerosols. They are often referred to as 'disposable dust masks', are widely used, and generally require no cleaning or maintenance. They are available in three classes: FFP1, FFP2 and FFP3, with the higher numbers corresponding to better filtering efficiency. As with all types of Personal Protective Equipment (PPE) sold in the UK, they must comply with the EU PPE Directive 89/686/EEC. It is the responsibility of the manufacturer or person placing the RPE on the European...
Z259.17-16 - Selection and use of active fall-protection equipment and systems
Effective abatement of fall hazards is complex, requiring skilled selection and assembly of equipment and systems. The chosen solutions need to be understood and properly used by workers, balancing protection from danger against the practical need to accomplish work. The optimal solution needs to consider the type of work, the frequency of access, the knowledge and skill of the workers, and many other factors. A solution that is effective for one situation can be cumbersome or even dangerous in another. Source: http://shop.csa.ca/fr/canada/protection-contre-les-chutes/z25917-16/invt/27039572016
Z96-15 - High-visibility safety apparel
This is the third edition of CSA Z96, High-visibility safety apparel. It supersedes the previous editions published in 2009 and 2002. This edition incorporates advice on selection, use, and care of high-visibility safety material taken from the CSA Z96.1 Guideline (see Annex A). It is designed to be in technical harmony with ANSI/ISEA 107 and ISO 20471. The focus of this Standard is on the performance of retroreflective and background materials incorporated into garments intended to provide the wearer with increased conspicuity under both wellilluminated and low-light or dark work environmental...
Developing a Performance Standard for Combination Unit Respirators
Workshop in Brief Combination unit respirators, a respirator that employs the technology of two or more types of respiratory protection, are presently used in the United States by some law enforcement and military units to respond to situations in which there are unknown and potentially dangerous respiratory hazards; they also have some industrial uses and potential for use in emergency response. On April 30, 2015 the Institute of Medicine hosted a workshop to explore the standards and research issues relevant to these respirators and their certification by the National Personal Protective Technology...
Z94.1-15 - Industrial protective headwear
Performance, selection, care, and use The latest edition of CSA Z94.1 – Industrial Protective Headwear – Performance, Selection, Care and Use joins our suite of Personal Protective Equipment standards and applies to protective headwear for industrial, construction, mining, utility, and forestry workers. It defines the areas of the head that are to be protected and basic performance requirements. According to OHS Regulations – Section 12.4, only when there is a foreseeable danger to a worker's head at a work site is industrial headwear required. Employers can help to reduce...
Groupe CSA publie une nouvelle édition de la norme sur les dispositifs autorétractables pour la prévention des chutes
Les chutes de hauteurs comptent parmi les causes les plus courantes de blessures graves et de décès liés au travail. Quand des conditions de travail comportent un risque de chute, un système de protection antichute est un élément essentiel des pratiques et procédures en matière de santé et sécurité au travail (SST). La nouvelle édition de la norme Z259.2.2 Dispositifs autorétractables fait partie de la série de solutions antichute de Groupe CSA. Cette nouvelle édition comprend des mises à...
Preventing Falls through the Design of Roof Parapets
Workers are exposed to risks from falls during construction, operation, maintenance, and demolition of buildings. Parapets are the parts of the wall assembly that extend above the roof [Rajendran and Gambatese 2013] and can prevent falls from low-sloped (flat) roofs. Other design features that can prevent falls include using guardrail systems and permanent anchor points (for use with personal fall arrest systems and lifelines) [See NIOSH 2013 for more information]. Source : http://www.cdc.gov/niosh/docs/2014-108/
Ceinture de sécurité pour chariots élévateurs à contrepoids
Étude préliminaire de critères normatifs et d'utilisabilité Pour éviter les accidents, parfois mortels, auxquels le renversement d'un chariot élévateur expose le cariste, le Règlement sur la santé et la sécurité du travail a été modifié en 2008. Ces véhicules doivent dorénavant être munis d'un dispositif de retenue, par exemple, une ceinture de sécurité, une cabine fermée ou des portes grillagées. Une étude préalable a démontré...
Plus de Messages Page suivante »

Abonnement courriel

Messages récents

Catégories

Mots-Clés (Tags)

Blogoliste

Archives