Parcourir par tags

Tous les tags » Normes et législation » Secteurs d'activités (RSS)
NFPA 1999 - Standard on Protective Clothing and Ensembles for Emergency Medical Operations
This standard specifies requirements for EMS protective clothing to protect personnel performing patient care during emergency medical operations from contact with blood and body fluid-borne pathogens. It also includes additional requirements that provide limited protection from specified CBRN terrorism agents. Source: https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=1999
ASTM F903 - 18 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Significance and Use: This test method is normally used to evaluate the barrier effectiveness against penetration of liquids through materials, seams, closures, or other planar assemblies used in protective clothing and specimens from finished items of protective clothing. Finished items of protective clothing include gloves, arm protectors, aprons, coveralls, suits, hoods, boots, and similar items. Scope: This test method is used to test specimens of protective clothing materials, assemblies such as seams and closures, or interfaces used in the construction of protective clothing. The resistance...
ASTM F2669 - 12(2018) - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
Scope: This specification establishes minimum performance, classification, and labeling requirements for protective clothing worn by operators applying pesticide products, primarily field strength, in liquid form. Protective clothing items covered by this specification include, but are not necessarily limited to, liquid-tight or spray-tight garments, coveralls, jackets, shirts, and pants. This specification addresses protection provided by protective accessories, with the exception of those used for the protection of the head, hands, and feet. This specification does not address protection against...
ASTM F2130 - 11(2018) - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
Significance and Use: This test method can be used for laboratory screening of protective clothing material used to manufacture garments and accessories worn by pesticide workers. This test method can be used for the development and evaluation of new protective clothing materials. This test method can be used for the evaluation of protective clothing materials against new pesticide formulations. Scope: This test method measures repellency, retention, and penetration of a known volume of liquid pesticide when applied to protective clothing material. No external hydrostatic or mechanical pressure...
ASTM E3108-18 - Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
Scope: This practice establishes the conformity assessment requirements for protective gloves worn by law enforcement and corrections officers. It was developed based on end user input regarding hazards of concern and operational requirements of officers.2 This practice provides two options for conformity assessment: (1) supplier's declaration of conformity (SDOC) and (2) certification. This practice is intended to be used by purchasers and suppliers in the procurement of gloves that meet Specification E3109, and the purchaser is responsible for selecting either SDOC or certification. Source...
ASTM E3109-18 - Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
Scope: This specification addresses protective gloves worn by law enforcement and corrections officers. This specification and related standards were developed by subject matter experts, including experienced end users, using data from a survey of more than 800 U.S. law enforcement and corrections officers. This specification addresses performance requirements, performance ratings, and test methods for whole gloves and for glove components (for example, materials, layers). Source: https://www.astm.org/Standards/E3109.htm
ASTM F2100 - 11(2018) - Standard Specification for Performance of Materials Used in Medical Face Masks
This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing for bacterial filtration efficiency, differential pressure, sub-micron particulate filtration efficiency, resistance to penetration by synthetic blood, and flammability. This specification does not address all aspects of medical face mask design and performance, the effectiveness of medical face mask designs as related...
Preventing Falls through the Design of Roof Parapets
Workers are exposed to risks from falls during construction, operation, maintenance, and demolition of buildings. Parapets are the parts of the wall assembly that extend above the roof [Rajendran and Gambatese 2013] and can prevent falls from low-sloped (flat) roofs. Other design features that can prevent falls include using guardrail systems and permanent anchor points (for use with personal fall arrest systems and lifelines) [See NIOSH 2013 for more information]. Source : http://www.cdc.gov/niosh/docs/2014-108/
Prévention des risques de chutes de hauteur
Face aux situations dangereuses posées par le travail en hauteur, une démarche de prévention adaptée s'impose. Cette nouvelle brochure réalisée conjointement par l'INRS et l'OPPBTP (référence ED 6110) fait le point sur cette problématique. Son objectif : aider les entreprises à faire leur choix parmi les équipements de protection disponibles. Source : http://www.inrs.fr/accueil/header/actualites/brochure-risque-chute-hauteur.html

Abonnement courriel

Messages récents

Catégories

Mots-Clés (Tags)

Blogoliste

Archives