Parcourir par tags

Tous les tags » Secteurs d'activités (RSS)
NF ISO 8759 - Tracteurs agricoles - Équipement monté à l'avant
Domaine d'application: Le présent document spécifie des exigences de sécurité relatives aux prises de force montées à l'avant des tracteurs agricoles, ainsi que des zones de dégagement autour de ces prises de force. Source: https://www.boutique.afnor.org/norme/nf-iso-8759-1/tracteurs-agricoles-equipement-monte-a-l-avant-partie-1-prise-de-force-exigences-de-securite-et-zone-de-degagement-autour-de-la-/article/903419/fa191294
Nouvelle publication de l’INRS : scies à ruban à table
Destiné aux chefs d'entreprise, aux cadres et à la maîtrise, cet aide-mémoire technique examine les risques du poste de travail sur les scies à ruban à table, ainsi que les moyens de les prévenir. Au sommaire : fonction ; terminologie ; description ; conditions d'acquisition, de réception, d'implantation, d'installation et de conseils d'utilisation des machines en service ; conseils pour l'utilisation et la mise en oeuvre des scies à ruban à table. Source : http://www.inrs.fr/actualites/aide-memoire-technique...
Guidance on Safety in Concrete Pumping
The aim of this guidance is to improve standards of safety during concrete pumping and reduce the incidence of collapse of concrete pump rigs and injuries due to incidents involving pressurisation of pipework or other equipment. As with all construction equipment, the safe operation of concrete pumps depends on a number of factors including the selection and maintenance of the pump and placing boom, the planning and supervision of their use and the competence of the operator and other personnel. If any of these are deficient, the risk of a serious accident increases significantly, so it is essential...
Presses plieuses hydrauliques pour le travail à froid des métaux
Amélioration de la sécurité sur les machines en service dans le cadre de leur rénovation. Spécifications techniques à l'usage des utilisateurs, des préventeurs et des rénovateurs Ce guide concerne les presses plieuses hydrauliques à chargement et/ou à déchargement manuel, non marquées "CE". Il est destiné à guider les utilisateurs et les préventeurs, aidés du rénovateur, dans le diagnostic de sécurité des presses plieuses hydrauliques, et à définir...
Improving farm safety: standards for agricultural machinery just updated
The series of standards ISO 25119, Tractors and machinery for agriculture and forestry – Safety-related parts of control systems, is widely used by the agricultural industry and its suppliers and has recently been updated. It sets out the general principles for the design and development of safety-related parts of control systems on tractors and self-propelled ride-on machines used in agriculture and forestry. It can even be applied to mobile equipment used in municipalities such as street-sweeping machines. The standards in the series are: · ISO 25119-1, Tractors and machinery for...
Fault tree analysis and risk mitigation strategies for mine hoists
Mine hoist are an essential part of an underground mine. In addition to extracting the ore from the mine, this machine transports the miners from the surface to the various underground levels of the mine. The two main hazards to which minors in the cage are exposed to are rope severance and loss of control of the hoisting machine. In both cases, the risk is the crashing of the cage at one end of the shaft. Hoisting accident and fatalities are rare but still happen despite the use of safety catches to retain the cage in the event of rope severance. The objective of this article is to improve mine...
Hazardous Energy Control (Lockout and Other Means)
It is a matter of life and death. Hazardous energy control is more than Lockout. It encompasses Machine Guarding, Alternative Measures (alternative guarding arrangement that prevents exposure to hazardous energy), Lockout, and other methods of ensuring worker safety from contact with hazardous energy. Here you will find information on regulatory requirements, general guidance and procedures that your company can use to implement an effective Hazardous Energy Control (Lockout/Tagout) Program and prevent unexpected energizing, start-up or release of stored energy which could cause serious injury...
Tower crane safety on construction sites: A complex sociotechnical system perspective
Tower crane is the lifeline of the construction industry, but tower crane accidents are still too frequent. Despite the significant progress in tower crane safety research, system thinking-based approaches are lacking. The aim of this paper is to analyze tower crane safety from a complex sociotechnical system perspective through implementing both qualitative and quantitative analysis methods. Characteristics of five tower crane safety system components are summarized with a new framework comprised of five system-based levels based on Rasmussen's risk management theory. Fifty-six contributing...
Common human factors underlying worker fatalities in the waste and recycling industry
Research was carried out to identify common human factors underlying fatal incidents and to provide insights into possible options for concerted action to help reduce the likelihood of serious incidents or fatalities. The research reviewed 18 fatal incidents and included in-depth interviews with HSE inspectors involved in the incident investigations. Of these incidents, 12 were in ‘small and medium enterprises', SMEs (with less than 250 employees) and 6 in large enterprises (250 or more). The research identified two priority human factors areas to tackle to reduce worker fatalities: equipment...
Débroussaillage - 3e édition
Cette brochure traite des travaux de débroussaillage, des techniques de travail et des situations dangereuses. On y décrit également les responsabilités de l'employeur et du travailleur, l'équipement de protection individuelle à utiliser et des règles à suivre en matière de premiers secours et de premiers soins. Pour cette 3e édition, des changements importants ont été apportés aux pages 14-15 et 16 où il est question du choix des lames. Source: http://www.cnesst.gouv.qc.ca/Publications/200...
Critères d’aménagement sécuritaire et ergonomique des postes de haleur et de support à casiers des homardiers du Québec
La pratique de la pêche commerciale est reconnue comme l'un des métiers les plus dangereux à l'échelle mondiale. Entre 2012 et 2014, elle a fait l'objet de deux projets de recherche qui ont été réalisés en Gaspésie et aux Îles-de-la-Madeleine. Le premier visait à analyser les activités de travail et les risques de chute par-dessus bord des homardiers ainsi que leurs déterminants, tandis que le deuxième consistait en l'étude des aménagements aux postes de travail «...
ISO 17757:2017 - Earth-moving machinery and mining
Autonomous and semi-autonomous machine system safety This document provides safety requirements for autonomous machines and semi-autonomous machines used in earth-moving and mining operations, and their autonomous or semi-autonomous machine systems (ASAMS). It specifies safety criteria both for the machines and their associated systems and infrastructure, including hardware and software, and provides guidance on safe use in their defined functional environments during the machine and system life cycle. It also defines terms and definitions related to ASAMS. Source: https://www.iso.org/obp/ui/fr...
Appareils de levage. Grue de chargement
L'utilisation des appareils de levage fait l'objet de règles, touchant à la fois aux choix, aux vérifications, aux conditions d'utilisation, à la maintenance du matériel et à la formation du personnel. Ce manuel aborde précisément ces règles. Il s'adresse aux chefs d'établissements, chargés de sécurité, formateurs et bien sûr aux conducteurs eux-mêmes. Source: http://www.inrs.fr/media.html?refINRS=ED%206278
Guide de prévention à destination des fabricants et des utilisateurs pour la mise en œuvre des applications collaboratives robotisées
La robotique industrielle se développe à travers des applications nouvelles et variées. Parmi celles-ci, certaines applications robotisées collaboratives ont pour objet et effet de faire travailler l'homme et le robot à des tâches complémentaires dans un espace de travail partagé. Elles constituent un modèle de production en devenir, porteur d'amélioration des conditions de travail, de flexibilité de l'appareil productif et de qualité des produits mais également de risques qu'il y a lieu d'évaluer...
Implantation du cadenassage des équipements mobiles dans le secteur municipal
Étude exploratoire Lors d'une étude précédente, il a été constaté que les équipements mobiles (c.-à-d. machines ou équipements autopropulsés, remorqués ou transportés) sont rarement pris en compte dans les programmes de cadenassage, bien qu'ils soient des sources potentielles d'accidents graves lors de phases hors production. Les obligations réglementaires vis-à-vis du contrôle des énergies dangereuses concernent les équipements mobiles au même titre que...
Secteur minier - Approche intégrée de mesure de contraintes in situ par méthode inverse
La conception sécuritaire des excavations souterraines requises pour l'exploitation minière nécessite une bonne connaissance de l'état des contraintes naturelles du massif rocheux. À ce jour, la seule façon de connaître ces contraintes avec une justesse acceptable consiste à réaliser des mesures in situ. Or, les techniques de mesure de contraintes couramment utilisées dans les mines du Québec se heurtent à des limites importantes sur le plan de la fiabilité et de la précision, ce qui laisse...
Renversement latéral des chariots élévateurs
Évaluation de systèmes à gain de stabilité Les chariots élévateurs à contrepoids sont des engins de manutention relativement instables de par leur conception. pour pallier cette difficulté, les principaux fabricants européens ont récemment proposé des améliorations sous forme de systèmes permettant d'augmenter la stabilité. Une étude a été menée par l'INRS et le BGHW pour évaluer ces dispositifs. Cet article en présente les résultats. Source...
Multi-site delivery issues for heavy goods vehicles
The purpose of this scoping study was to establish whether there were specific safety issues relating to multi-site deliveries, and how widespread these were within the UK road haulage industry. This study builds on previous work carried out on load securing of goods transported by road. Multi-site deliveries in themselves do not appear to introduce additional hazards, over and above those encountered in the haulage industry overall. However, they do appear to increase the exposure to hazards because drivers are required to access the load area more frequently and the profile of multi-site deliveries...
Exploring the human and physical factors associated with telescopic handler overturning risks
A combination of machine instability and various human factors elements are important precipitating factors in telescopic handler overturn incidents. Industry guidance makes a number of assumptions about the impact of operator “knowledge gaps”, however the link between operator knowledge gaps and overturn risk is, at present, hypothetical and remains empirically untested. This study was done to identify: - the full range of human factors issues that might potentially contribute to telescopic handler overturn incidents; - the human factors issues that appear to be most important in terms...
Noise risk as described in instructions supplied with printing machinery
The printing industry uses a wide range of noisy machines that have the potential to damage workers' hearing if the risks are not effectively managed. Users need information that represents noise emissions during the intended uses of the machine, to enable an assessment and the management of the associated noise risks. There is a legal requirement under the Supply of Machinery (Safety) Regulations 2008 for machinery manufacturers to provide declared noise emissions in instruction manuals. (This legislation implements the EU Machinery Directive 2006/42/EC). However, there is a lack of information...
A hybrid human and organizational analysis method for railway accidents based on HFACS-Railway Accidents (HFACS-RAs)
Accidents continue to be the major concern in the railway industry, and human factors have been proved to be the prime causes to railway accidents. In this paper, the Human Factors Analysis and Classification System-Railway Accidents (HFACS-RAs) framework is proposed to identify and classify human and organizational factors involved in railway accidents. To establish an applicable HFACS-RAs framework, large amount of incident and accident data are collected and the existing safety flaws are identified by safety experts, manufactures and railway managers who have attended the HFACS workshop. To...
The use of vehicle structure in load securing on heavy goods vehicles
Securing loads for safe transport is a legal requirement in the UK. It helps to protect the driver of the vehicle, other road users and pedestrians during the vehicle's journey from vehicle rollover or load detachment, and the driver and unloading personnel from the risks inherent in unloading a load that has been able to move in transit. This report assesses the legislation applicable to the transport of goods in the UK under both road traffic and health and safety at work legislation. It assesses the guidance available to operators and consignors and the methods of securing loads that are...
A study of the generic safety-integrity requirements of fairground rides
The use of computer-based control systems allows modern fairground rides to perform increasingly complex functions at very high speeds. In some cases, passenger safety will depend on the correct operation of these control systems, so their failure could compromise passenger safety. As a result, it is important that the rate of potentially dangerous control-system failures is adequately low in relation to the hazard level associated with the functions that they carry out. Quantitative risk assessment techniques are used in, for example, the process and manufacturing industries, but these techniques...
Grues à tour
Gestion des zones d'interférence et des zones interdites sur les chantiers Compte tenu des contraintes propres à certains chantiers, les grues à tour se trouvent souvent implantées au coeur de zones d'interférence et de zones interdites. L'objet de ce guide est de repréciser les règles de bonne pratique en matière de choix et d'utilisation des dispositifs de sécurité de gestion de ces zones à risque ainsi que les règles en matière de formation du personnel. Il vient compléter la collection...
A new approximation for risk assessment using the AHP and Fine Kinney methodologies
The most important stage in the field of occupational health and safety is the assessment stage, where the risk point of each identified hazard is calculated, and a determination is made as to whether the hazard level is acceptable or unacceptable. In the field of risk assessment, the Fine Kinney method is commonly used in practice. The Analytical Hierarchy Process (AHP) might also be used as an efficient method in determining the importance levels of the hazards in risk assessment studies, but the AHP method does not determine whether the hazards are at an acceptable level based on their risk...
Plus de Messages Page suivante »

Abonnement courriel

Messages récents

Catégories

Mots-Clés (Tags)

Blogoliste

Archives